Cisco
From Bashlinux
Cisco
Starting up
Setup cable connection
To link your computer with the appliance:
- Plug the RJ-45 to the appliance
- Plug the DB-9 connector to your computer
In case the you computer has not serial port available, you can use a "USB to Serial" cable. It has different names on each system:
- Linux
/dev/ttyUSB0
- Mac OS X
/dev/tty.usbserial
Mac OS X require a special driver
It's available as attachment but recent version might be available at Prolific website [[1]]
Going into the terminal
use the `screen` command as follows:
} screen /dev/ttyX
Where `X` means one of the names on prior section, based on the OS you are working with.
HTTPS/Java Client
This is the Adaptive Security Device Manager (ASDM), to access the appliance by this way:
- Open the web browser
- Type the device IP address in your browser, but don't forget to add https before the IP address.
It will ask if you want to run ASDM as applet on browser or to download a Java launcher for ASDM.
By default user/password are empty.
Cisco CLi
This is the console for local access command line administrative tasks.
Setup DNS update on DynDNS Server
configure terminal interface Dialer3 ip ddns update hostname myhost.dyndns.org ip ddns update sdm_ddns1 ip address negotiated ip access-group 131 in ip mtu 1452 ip nat outside ip virtual-reassembly encapsulation ppp
Setup DHCP AT&T ISP
dialer pool 1 dialer-group 1 ppp authentication pap callin ppp pap sent-username [email protected] password 7 141A1B051B012627377D