Korg NX5R
From Bashlinux
How to switch to Wavetable (Daughterboard)
- Press the "Edit/Enter" button to get to the <EDIT MENU> screen
- Select "Part Edit" and press the "Edit/Enter" button to get to <PART EDIT>
- On the <PART EDIT> screen select "Common" and press the "Edit/Enter" button to get to the <PART-MASTER1> screen
- On the <PART-MASTER1> screen press the "Part/Page >" button 2 times to get to the <MIDI TO PORT> screen.
- Using the jog dial change all the channels to C.
- The WT board will then work.
- (Make sure to turn up the volume dial on the back of the unit)
- Press the "Disp/Exit" button to save and exit